Deck Permit Cost in Frisco, TX (2026)
Residential deck permit fees for the City of Frisco, Texas (Collin and Denton Counties, DFW Metroplex), pulled directly from the Permit, Inspection and Miscellaneous Consolidated Fee Schedule, updated October 7, 2025. Frisco prices a conventionally framed deck as $75 plus $0.59 per gross square foot (or fraction), capped at a maximum of $550. A ground-level concrete-only deck is a flat $75.00. Both are size-driven building lines, not valuation-based. Deck electrical - lighting, fans, or outlets pulled as their own permit - is not included. Texas has no statewide permit levy, and Frisco adds no percentage surcharge on the deck line.
This guide covers: The City of Frisco residential deck permit fee as printed in the Consolidated Fee Schedule (updated October 7, 2025). A conventionally framed deck is $75 plus $0.59 for each gross square foot (or fraction), to a maximum of $550. The schedule also prints a separate "deck only / concrete" line at a flat $75.00 for a ground-level concrete slab deck with no framed structure. Both are exact from the schedule.
Deck electrical is separate: the deck figure is the building permit for the deck structure. If your deck adds lighting, a ceiling fan, or outlets pulled as their own electrical permit, Frisco prices standalone electrical separately - a $50 issuance fee plus $0.03 per gross square foot and $4.75 per residential appliance. This guide reports that as a separate line and does not fold it into the deck fee.
On plan review: Frisco has no standalone percentage-based residential plan review fee - it is bundled into the permit fee - so no separate plan-review percentage attaches to the flat-plus-per-square-foot deck line. A plan revision review is $50 per hour if you resubmit.
This guide does NOT cover: deck construction cost, a patio cover or arbor (each is its own $75 + $0.59/sq ft line, max $550), pool decking, impact and development fees, water and sewer tap fees, or HOA approvals. These are separate and are not included in the deck permit figure.
A conventionally framed residential deck permit in Frisco, TX is $75 plus $0.59 per gross square foot, capped at $550. A 200 sq ft deck is $193.00; a ground-level concrete-only deck is a flat $75.00. Deck electrical, when pulled separately, adds a $50 issuance fee plus components and is not included. No plan-review percentage attaches to the deck line. Texas adds no state levy. Figures are from the Consolidated Fee Schedule, updated October 7, 2025.
- Frisco charges $75 plus $0.59 per gross square foot for a conventionally framed deck permit, capped at a $550 maximum - a size-driven building line, not a valuation-based schedule.
- The per-square-foot cap is reached at roughly 806 gross square feet: any framed deck above that size pays the flat $550 maximum.
- A ground-level concrete-only deck (a slab with no framed structure) is a separate flat $75.00 line. Patios covers and arbors use the same $75 + $0.59/sq ft formula as a framed deck.
- Deck electrical is not bundled into the deck permit. Frisco prices standalone electrical as its own permit - a $50 issuance fee plus $0.03 per gross square foot and $4.75 per residential appliance - so deck lighting or outlets pulled on their own are a separate line.
- No plan-review percentage attaches to the deck line. Frisco bundles residential plan review into the permit fee; a plan revision review is $50 per hour only if you resubmit. Among verified Texas cities, Frisco's size-based deck fee contrasts with flat lines like Mesquite's $60 and League City's $100.
- The figures come from the Frisco Consolidated Fee Schedule (updated October 7, 2025), re-confirmed against the live PDF on September 2, 2026 - a current schedule. Confirm current amounts and whether deck electrical needs a separate permit with the Building Inspections Division before budgeting.
Frisco Deck Permit Fee Structure
A framed deck permit is a base fee plus a per-square-foot rate, capped at a maximum. A concrete-only deck is a separate flat line. Deck electrical, when pulled separately, is its own permit. There is no valuation calculation on the deck line and no statewide levy.
| Item | Fee | How It Is Calculated |
|---|---|---|
| Conventionally framed deck | $75 + $0.59/sq ft | Base $75 plus $0.59 for each gross square foot (or fraction), to a $550 maximum. |
| Maximum deck fee (cap) | $550.00 | The per-square-foot line stops at $550 - reached at roughly 806 gross sq ft. |
| Deck only / concrete | $75.00 | Flat line for a ground-level concrete slab deck with no framed structure. |
| Patio cover / arbor | $75 + $0.59/sq ft | Same formula as a framed deck, max $550 - a separate line if you add a cover. |
| Deck electrical (if pulled separately) | $50 issuance + $0.03/gsf + $4.75/appliance | Standalone electrical permit - a separate permit, not part of the deck line. |
| Plan review on the deck line | None | Frisco bundles residential plan review into the permit fee. |
| State / city percentage levy | None | Texas has no statewide permit levy; Frisco adds no percentage surcharge on the deck line. |
Source: City of Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule, updated October 7, 2025. The deck-electrical row reports the separate standalone electrical permit fee, not an addition to the deck line - confirm whether a separate electrical permit is required with the Building Inspections Division.
Worked Examples - Real Deck Projects in Frisco
The framed-deck permit scales with gross square footage until it hits the $550 cap. A concrete-only deck is a flat line. Figures are from the Consolidated Fee Schedule, updated October 7, 2025.
A homeowner adds a 200 gross square foot wood deck off the back of the house.
- Base deck permit: $75.00
- Per-square-foot: 200 × $0.59 = $118.00
- Texas state levy: $0.00 (none)
- Deck permit: $193.00 (before any electrical)
Well under the $550 cap. If the deck adds lighting or outlets on a separate electrical permit, add $50 issuance plus components.
A larger 400 gross square foot deck with a built-in bench.
- Base deck permit: $75.00
- Per-square-foot: 400 × $0.59 = $236.00
- Deck permit: $311.00 (before any electrical)
Still below the $550 cap. The cap is reached at about 806 gross sq ft, after which the fee stays $550.
A homeowner pours a ground-level concrete slab deck with no framed structure.
- Deck only / concrete: $75.00 (flat)
- Deck permit: $75.00
The concrete-only line is flat at $75.00 regardless of slab size. Whether your project is a framed deck or a concrete-only deck is a determination for Building Inspections.
When This Estimate May Not Apply
The deck figures cover the deck permit itself on Frisco's Consolidated Fee Schedule. Route your project to the Frisco Building Inspections Division before relying on these figures if any of the following applies:
- Deck electrical is permitted separately. Deck lighting, a fan, or outlets pulled as their own permit are a standalone electrical permit - a $50 issuance fee plus $0.03/gsf and $4.75 per appliance - not included in the deck fee.
- Your deck is a concrete slab, not framed. A ground-level concrete-only deck is a flat $75.00 line, separate from the $75 + $0.59/sq ft framed-deck line. Building Inspections decides which line applies.
- You add a cover. A patio cover or arbor over the deck is its own $75 + $0.59/sq ft line (max $550), not folded into the deck fee.
- The deck is part of a larger addition. If the deck ties into a room addition or new roof structure, the project may be permitted under the new-construction or general-alterations line ($75 + $0.45/sq ft, max $550) instead.
- The schedule is updated. These figures are exact from the Consolidated Fee Schedule updated October 7, 2025 and confirmed live September 2, 2026. Frisco references a broader citywide fee schedule that can change; confirm the current amount before filing.
Deck electrical, a patio cover, and impact/utility fees are excluded from the deck permit figure on this page, and the page-standard disclaimer applies - always verify with the Frisco Building Inspections Division before budgeting.
Frisco Deck Permit Cost vs Other Verified Texas Cities
Texas cities price deck permits on different models - flat lines, per-square-foot lines, and bundled fees. The table below compares Frisco's size-based deck permit with other verified Texas cities. Scope differs, so each figure notes its basis.
| City | Deck Fee Basis | Deck Permit (200 sq ft) |
|---|---|---|
| Frisco, TX | $75 + $0.59/sq ft, max $550 | $193.00 |
| Mesquite, TX | Flat line | $60.00 |
| League City, TX | Flat line | $100.00 |
| Irving, TX | Flat line | $65.00 |
| Round Rock, TX | Valuation-based | Varies by cost |
Scope note: Frisco's $193.00 is the framed-deck permit for a 200 sq ft deck; a concrete-only deck is a flat $75. Mesquite ($60), League City ($100), and Irving ($65) use flat deck lines that do not scale with size, while Round Rock is valuation-based. Compare the fee basis, not just the headline number, and confirm current figures with each department.
See Frisco's full residential fee schedule, or compare another verified Texas city.
Frequently Asked Questions
Who to Contact
| Department | City of Frisco - Development Services, Building Inspections Division (972-292-5301) |
| Location | George A. Purefoy Municipal Center, 6101 Frisco Square Blvd, 3rd Floor, Frisco, TX 75034 (Collin & Denton Counties) |
| Fee schedule | Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule (updated 10-7-2025) |
Sources
-
City of Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule (Updated 10-7-2025) City of Frisco official fee schedule PDF (.gov). Primary source for the $75 + $0.59/sq ft framed-deck line (max $550), the flat $75.00 concrete-only deck line, and the standalone electrical permit fee. Re-downloaded and re-read September 2, 2026 exact - updated October 7, 2025
-
Texas Local Government Code, Chapter 214 Texas statute (.gov) confirming municipal building-regulation authority and that Texas imposes no statewide percentage building-permit levy. Context for the "no statewide levy" statement. Verified September 2026.